Quality aftermarket replacement electronic throttle body for various SeaDoo Personal Watercraft and SeaDoo Jet Boats models.
This throttle body measures 60mm, exactly as OEM size, direct replacement with stock throttle body using the provided gasket and mounting bolts. No reset position sensor reset is required.
P160E P1610 P1611 are the most common error codes of a failed, or failing, throttle body.
Why spend $800 USD from the dealer when you can get one from us for only $175.
BRP SeaDoo throttle body part number 420892592 420892591 420892590 and Bosch 0280750505 replacement.
Will replace if the throttle body fails as long as the failure has not been caused by water damage eg: sinking, flooding or intercooler leaking.
Always in stock and ships same day with tracking if ordered by 3pm EST time!
3-business day Fedex Priority International shipping, to most locations in the world, is available at additional cost, please contact us for exact cost.
1. Open/remove seat.
Models with Suspension
2. Remove rear ventilation box.
3. Remove deck extension.
4. Lift suspension to gain access.
NOTE: If more height is required or if the suspension electronic control cannot be used, manually lift suspension by the anchor points close to handlebar and safely block in this position. Do not lift the watercraft from the anchor points.
5. Disconnect inlet hose from throttle body.
6. Disconnect throttle body connector.
To remove connector from throttle body, press connector locking tab illustrated.
7. Remove retaining screws from throttle body.
Installation of the new throttle body is the reverse of the removal procedure. However, pay attention to the following.
1. Torque retaining screws in a criss-cross sequence to 9 N•m (80 lbf•in).
Received quickly, seem to work as described, thanks
first time working on my gtx so it took me a bit of time to install but all good
starts good, can do a real test during winter but it starts and runs with no errors
thanks, quick shipping
Got delayed by USPS but fixed P1611 on my 2012 rxp260.
thanks, got me back on the water for way less than what the dealer wanted!!
Saved me over $500! Works just like described, took me 20 minutes to install on my RXT
Works, will get more for my customers in the future, saves a bunch over oem
If you're not sure about your model please contact us below. This throttle body is fully compatible with the following models.